Makrolon  3208

MVR (300 °C/1.2 kg) 5.0 cm3/10 min; medical devices; suitable for ETO and steam sterilization at 121 °C; biocompatible according to many ISO 10993-1 test requirements; high viscosity

Makrolon  XT5010

MVR (300 °C/1.2 kg) 34 cm3/10 min; easy processing; low viscosity; easy release; Vicat softening temperature 50 N, 50 °C/h = 110 °C; LCD tv frame

Makrolon  AX2675 ST

Automotive eXterior grade with specified Sensor signal Transparency; MVR (300 °C/1.2 kg) 12 cm3/10 min; medium viscosity; easy release; developed for high-gloss surfaces with highest requirements; for the use in combination with hard coatings; for high transmittance applications in the near-infrared range (NIR)

Makrolon  AG2477 DQ

light diffusion grade; MVR (300 °C/1.2 kg) 19 cm3/10 min; low viscosity; easy release; UV stabilized; automotive glazing

Makrolon  6487 RE

MVR (300 °C/1.2 kg) 9.0 cm3/10 min; flame retardant; UL 94V-0/1.5 mm and 5VA/3.0 mm; medium viscosity; UV stabilized; easy release

Makrolon  Rx1851

MVR (300 °C/1.2 kg) 23 cm3/10 min; medical devices; low viscosity; easy release

Makrolon  FR6009

medium viscosity; UV stabilized; flame retardant; impact modified; improved chemical resistance compared to standard Makrolon grades; housing parts; Information technology; electrical/electronic

Makrolon  FP3087

MVR (300 °C/1.2 kg) 7.0 cm3/10 min; high viscosity

Makrolon  AL2447 MAS181

MVR (300 °C/1.2 kg) 19 cm3/10 min; Automotive lighting; low viscosity; UV stabilized; easy release; improved static behavior; headlamp lenses for automotive forward lighting

Makrolon  M830 GF

polycarbonate; MVR (300 °C/1.2 kg) 3.0 cm3/10 min; high viscosity; 30 % Glass fiber reinforced; biocompatible according to many ISO 10993-1 test requirements; suitable for medical devices

Makrolon  AX2477 ST

MVR (300 °C/1.2 kg) 19 cm3/10 min; low viscosity; UV stabilized; easy release; developed for high-gloss surfaces with highest requirements; for the use in combination with hard coatings