Makrolon  Rx2440

low viscosity; medical devices; suitable for sterilization with high-energy radiation in O2-free packaging

塑料

Makrolon Rx2440

材料类型

聚碳酸酯

材料

塑料：Medical,透明

机械性能：

属性名称 测试标准 测试标准 单位 数值

3.5%应弯时的弯曲应力 ISO 178 2 mm/min MPa 74

Charpy 冲击强度 ISO 179/1eU 23 °C kJ/m² N

Charpy 缺口冲击强度 ISO 21305/based on ISO 179/1eA 23 °C/ 3 mm kJ/m² 70P

Izod 缺口冲击强度 ISO 21305/based on ISO 180/A 23 °C/ 3 mm kJ/m² 60P

Puncture impact properties - maximum force ISO 6603-2 -30 °C N 6000

Puncture impact properties - maximum force ISO 6603-2 23 °C N 5100

名义断裂拉伸应变 ISO 527-1,-2 50 mm/min % > 50

屈服应力 ISO 527-1,-2 50 mm/min MPa 67

屈服应变 ISO 527-1,-2 50 mm/min % 6.1

弯曲强度 ISO 178 2 mm/min MPa 100

弯曲强度下的弯曲应变 ISO 178 2 mm/min % 7

弯曲模量 ISO 178 2 mm/min MPa 2400

抗拉模量 ISO 527-1,-2 1 mm/min MPa 2400

断裂应力 ISO 527-1,-2 50 mm/min MPa 70

断裂应变 b.o. ISO 527-1,-2 50 mm/min % 120

球压硬度 ISO 2039-1 N/mm² 118

穿透能量 ISO 6603-2 -30 °C J 65

穿透能量 ISO 6603-2 23 °C J 55

Makrolon  AX2675 RE

MVR (300 °C/1.2 kg) 12 cm3/10 min; medium viscosity; easy release; automotive exterior roof trim + pillar appliques; developed for high-gloss surfaces with highest requirements; for the use in combination with hard coatings

Makrolon  AL2647 RP70 CQ

polycarbonate; MVR (300 °C/1.2 kg) 12 cm3/10 min; Automotive lighting; medium viscosity; UV stabilized; easy release; headlamp lenses for automotive forward lighting

Makrolon  AX2675 ST

Automotive eXterior grade with specified Sensor signal Transparency; MVR (300 °C/1.2 kg) 12 cm3/10 min; medium viscosity; easy release; developed for high-gloss surfaces with highest requirements; for the use in combination with hard coatings; for high transmittance applications in the near-infrared range (NIR)

Makrolon  DQ5142 RE

MVR (300 °C/1.2 kg) 34 cm3/10 min; light diffusion grade; medium diffusion; low viscosity; UV stabilized; easy release

Makrolon  AX2677

MVR (300 °C/1.2 kg) 12 cm3/10 min; medium viscosity; easy release; UV stabilized; automotive exterior roof trim + pillar appliques; developed for high-gloss surfaces with highest requirements; for the use in combination with hard coatings